車輪裝備 車輪模具 汽車模具 汽車零部件

閃光對焊機

閃光對焊機是車輪輪輞焊接的專用設備,焊接參數由觸摸屏設定,自動化程度高、工作可靠、調整方便等特點。有效解決了高強板焊接牢固及焊口強度。

智能化:由伺服閥控制頻閃燒化的過程,使焊接穩定,響應速度快。針對厚度不同的輪輞,可以選擇相應的焊接檔位。

發展方向:實現無人化生產,組件自動上下料機構,實現相應配套

詳細描述


概述

Summary

本閃光對焊機是車輪輪輞焊接的專用設備,其工件的夾緊、焊接均為液壓驅動,焊接參數可由觸摸屏設定,具有自動化程度高、工作可靠、調整方便等特點。該機由主機、電氣系統、液壓系統三部分組成。

The model of welder is the dedicated equipment for welding rim and disc. Its clamping and upsetting drive by hydraulic system, the welding parameters can be set from touch screen, and it features a high degree of automation, reliable operation, easy adjustable, etc. The welder is made of host, electrical system and hydraulic system.


技術特色

閃光對焊機是車輪輪輞焊接的專用設備,焊接參數由觸摸屏設定,自動化程度高、工作可靠、調整方便等特點。有效解決了高強板焊接牢固及焊口強度。

智能化:由伺服閥控制頻閃燒化的過程,使焊接穩定,響應速度快。針對厚度不同的輪輞,可以選擇相應的焊接檔位。

發展方向:實現無人化生產,組件自動上下料機構,實現相應配套。


電氣系統

Electrical System

電氣系統包括焊接主電路和控制電路。

Electrical system includes welding main circuit and control circuit.

(1)焊接主電路由主開關QS、晶閘管開關KP和變壓器TC3等組成。主開關QS用于接通和切斷焊接回路供電電源,當調整變壓器級數或焊機長期不用時,應斷開QS。晶閘管開關在焊機工作時用于接通或關斷焊接電源。變壓器TC3用于提供不同電壓級別的焊接電壓,共8級。

Welding main circuit is composed of the main switch QS, thyristor switch KP and transformer TC3. The main switch QS is used for switch-on and turn-off the power supply of welding circuit, it shall be turn off if adjust welding transformer series or long time on use. The thyristor switch KP is used for switch-on or turn-off the welding power when welder is running. The transformer TC3 is used for supplying different welding voltage which is total 8 series for this model.

(2)控制電路由PLC的輸入/輸出電路、操作件、觸摸屏等組成。PLC是控制電路的核心,焊機按PLC的程序工作,旋轉編碼器經齒輪齒條與動板相接,用于檢測動板的位移,其精度為35脈沖/mm。PLC根據脈沖信號控制動板的變速和換向,觸摸屏用于監視焊機工作,并可按要求修改參數。

Control circuit is composed of PLC input/output circuit, operation element and touch screen etc. The PLC is the core of control circuit, and the welder will run according to the programs of PLC. The rotary encoder is connected with movable plate through pinion and rack which is used to detect displacement of movable plate, with accuracy of 35pulse/mm. PLC will control the speed and reversing of movable plate according to the pulse signal. Touch screen is used to monitor welding operation, amend parameter in line with welding requirements.


液壓系統

Hydraulic System

液壓系統由液壓站、管路和主機上的油缸、閥等組成。液壓站用于提供系統壓力。主機上的閥組用于控制各油缸的工作,其中頂鍛壓力、夾緊壓力、預熱壓力均可單獨調節,并有壓力表顯示調節值,在頂鍛油缸裝有一杠桿調節閥,用于調節動板向前時的速度。

、The hydraulic system is composed of hydraulic station, piping, oil cylinder and valve of host. Hydraulic station supplies the system pressure. The valves of host control the oil cylinders. The upsetting pressure, clamping pressure and pre-heating pressure can be adjusted separately which display the adjustment value by pressure gauge. And the upsetting oil cylinder is equipped with a lever regulating valve which is used for adjusting the forward speed of movable plate.


技術數據

Specification

設備型號

Model Number

UNB3-600-A

主電路額定輸入電壓 單相Rated Input Voltage of Main Power Circuit

AC 400~430V, 50Hz, single phas

控制電路額定輸入電壓 三相Rated Input Voltage of Control Power Circui

AC 380V, 50Hz, 3phas

主電路輸出電壓Output Voltage of Main Power Circuit8.8V~14.6V
電磁閥電壓(直流)Voltage of Solenoid ValveDC 24V
總輸入功率(千伏安)Total Input Power630KVA
最大頂鍛力Maximum Upsetting Force200KN
最大夾緊力Maximum Clamping Force550KN
最大焊接截面積Maximum Welding Section Area2800mm2
最大板寬Maximum Width of Rim Band320mm
最大板厚Maximum Thickness of Steel Strip4.5mm (up to 5.0mm)
最小焊接鋼圈直徑Minimum Diameter of Rim Band250mm
冷水機注水量Filling volume of cooling water machine1300L
冷卻水溫度Temperature of cooling water≤ 25℃

魯ICP備090054547號-1 | © 2018 山東小鴨精工機械有限公司 版權所有


掃一掃 了解更多

郵編:250000

地址:山東省濟南市工業南路51號

營銷事業部:+0531-83122188

郵箱:[email protected]

400-6586-222轉8

在線營銷
live chat
369网络棋牌 排列三开机号乐彩网 白小姐六肖中特期期公开 江苏时时计划软件下载 重庆时时网页版计划 上海时时走势图 三肖中特黄大仙i 上海时时3星走势图 四川时时走势图结果 天下彩开奖资料 快三助手官方下载